Advanced Coatings and Beyond

Website: http://www.advancedcoatingsandbeyond.com

PRODUCT NAME: SURECURE SEALER & PRIMER

Product Number: 205SC1, 205SC5 AND 205SC55

PRODUCT APPLICATION: SureCure is a clear weatherproof elastomeric sealer.

Product Description

SureCure is a clear (non-pigmented), weatherproof, elastomeric sealer. The small particle size of the resin copolymer in SureCure promotes superior penetration of substrates above and below grade. At the same time, it improves hydration reaction which promotes a uniform cure to help seal, harden and dust proof a vast array of substrates:

* Plywood and Concrete * Cinder Block and Brick * Stucco

* Previously Painted Surfaces * Tile and Pavers * Grout

Advantages

SurCure produces a clear, chemically  neutral,  hard,  non tacky surface with outstanding moisture and water resistant properties. The coating helps to act as a binding agent and chalk binder.  Prevents efflorescence buildup and blocks sand rust spots. Neutralizes pH factors and HOT SPOTS... stucco can be painted 72 hours after applied if coated with SurCure. Non-toxic, non-flammable and non-staining. Superior in its adhesion to produce a very bondable, mechanically stable surface.

Packaging and Mixing

SurCure is packaged ready to go out of the pail, do not dilute.

SurCure exhibits a milky white color, but will dry clear.

Thoroughly mix all containers for 5 minutes before application.

Coverage

Approximately 200-300 sq ft per 1 gallon. *

Available in the following container sizes:

1 Gallon 205SC1

5 Gallon 205SC5

55 Gallon 205SC55

Note: 250 Gallon Totes (205SC250T) are available with special ordering.

*Rates will vary depending upon type, porosity, and condition of substrate.

Technical Properties

Drytime @ 70 degrees F: To touch - 30 minutes

Recoat : Approximately 4 to 24 hours

Total Solids: 50%

Viscosity: 9000CPS

Ph:  8.0

Wgt/Gal (Emulsion) : 8.66

Wgt/Gal (Solid): 9.00

Particle Charge: Anionic

Particle Size: 0.15 Microns

QUB Weatherometer Test:  No change @ 1000 hours

Safety and Health: Refer to the MSDS for additional health and safety precautions.