Advanced Coatings and Beyond

 

Email: info@advancedcoatingsandbeyond.com

Website: http://www.advancedcoatingsandbeyond.com

 

PRODUCT NAME: COVER COAT

PRODUCT NUMBERS: 106CC1, 106CC5, 106CC55

PRODUCT APPLICATION: White Elastomeric Roof Primer. Cover Coat is a high solids 100 percent styrene acrylic elastomeric coating. Do not apply in temperatures below 40 degrees F or in high humidity conditions. Apply Cover Coat when there is threat of rain, dew or frost.

Product Description

Cover Coat is a high solids 100% styrene acrylic elastomeric coating. It combines an extremely long lasting high performance polymer resin with the highest grade sealing and bonding additives to assist in a tight seal of the porosity of various materials, such as:

* Plywood and Concrete * Urethane Foam * Shingles, wood or asphalt * Built up Roofing

* Mineral Roll Roofing * Sheet Metal Roofing * Tar & Gravel * Brie Rubberized

 

Advantages

Complete weatherproofing. With stands wind, driven rain, salt spray, and pounding water. Tenacious adhesion . Bonds top coat and roof substrate. Very economical requiring less material.  Easy to apply by brush, roll or spray.  Water based and environmentally friendly. UV Resistant. Forms a continuous, seamless, breathable membrane. Easy Clean up with soap and water.

Packaging and Mixing

Cover Coat is packaged ready to go out of the pail, do not dilute. Cover Coat exhibits a white color, which makes it highly reflective when topped with Final Coat. Thoroughly mix all containers for 5 minutes before application.

Available in the following container sizes:

1 Gallon:  106CC1

5 Gallon:  106CC5

55 Gallon: 106CC55

Note: Cover Coat is available in 250 Gallon Totes upon request. (106CC250T)

Coverage

1 Gallon covers approximately 100 sq ft. when applied as directed. *

*Rates will vary depending upon type, porosity and condition of roof.

 

Technical Properties

% Solids by weight:  66.7%

Weight per Gallon: 11.9 lbs

Elongation: 394%

Viscosity: 94

Tensile Strength: 264PSI

Resistance to pond water: 12.01

Dry time: to touch 2hrs@75F

Chemical Resistance: Excellent

Mildew Resistance: Excellent

Fire Resistance: Good

UV Resistance: Good

 

Safety and Health: Refer to the MSDS for additional health and safety precautions.

 

Advanced Coatings and Beyond™
Improving the Environment for Tomorrow with Specialty Coatings




 

 

  Site Map